Hot stamping machine /ACSB-3 | ||||||||||||||||||||||||||||||||||||
Usage¡G |
|
|||||||||||||||||||||||||||||||||||
1¡D |
Special for medium area hot stamping and marking, for example: PVC vacuum box, deform sheet, plastic case, wood, hot marking on leather¡C | |||||||||||||||||||||||||||||||||||
Feature¡G
|
||||||||||||||||||||||||||||||||||||
1¡D |
Adding | (1) ¡§beam sensor¡¨ device
for heat transfer foil setting position¡C (2)¡§slide table¡¨ device for loading and moving the article to hot stamping position¡C |
||||||||||||||||||||||||||||||||||
2¡D |
All-in-one body design with strong FC-25 steel die cast structure¡C | |||||||||||||||||||||||||||||||||||
3¡D |
The connections between air cylinder, main shaft and cover frame are precisely jointed with lowest frictions. Double elbows designed provide high pressure and low air consumption¡C | |||||||||||||||||||||||||||||||||||
4¡D |
3 timers control system: Press, Delay and Foil feed time can be easily adjusted¡C | |||||||||||||||||||||||||||||||||||
5¡D |
Well design foil feeding structure is not affected by axis of foil roller¡C | |||||||||||||||||||||||||||||||||||
6¡D |
Single elbow design can provide 3000kg pressure with low air consumption¡C | |||||||||||||||||||||||||||||||||||
7¡D |
Optional ready for automation equipment modules¡C | |||||||||||||||||||||||||||||||||||
8¡D |
Thermal controller can be set from 0 ¡V 400 ¢J easily¡C | |||||||||||||||||||||||||||||||||||
Specification¡G
|
||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||