Hot stamping machine /ACB-3
Usage：
1．
 Special for medium area hot stamping and marking, for example: PVC vacuum box, deform sheet, plastic case, wood, hot marking on leather。
 
Feature：
1．
 Adding the “beam sensor” device for heat transfer foil setting position。
2．
 All-in-one body design with strong FC-25 steel die cast structure。
3．
 The connections between air cylinder, main shaft and cover frame are precisely jointed with lowest frictions. Double elbows designed provide high pressure and low air consumption。
4．
 3 timers control system: Press, Delay and Foil feed time can be easily adjusted。
5．
 Well design foil feeding structure is not affected by axis of foil roller。
6．
 Single elbow design can provide 3000kg pressure with low air consumption。
7．
 Optional ready for automation equipment modules。
8．
 Thermal controller can be set from 0 – 400 ℃ easily。
   
Specification：
Model
ACB-3
Maximum Pressure
3000kg
Hot plate
120 × 180mm
Stroke
60mm
Depth of throat
200mm
Maximum opening
280mm
Operating table
280 × 380mm
Weight
205kg
Machine size
L × W × H = 105 × 75 × 150 cm
Package weight
270kg
Package size
L × W × H = 110 × 85 × 165 cm
   
Back products